StreetStangs.net  

Go Back   StreetStangs.net > Technical > Dyno Room

Reply
 
Thread Tools Display Modes
Old 12-28-2006, 06:24 PM   #1
Doug904
Member
 
Join Date: Mar 2005
Posts: 86
BamaChips Dynojet is now up and running!

Hey guys,

Well, I'm official! I've dynoed nearly everything in my yard, I got the 4 wheeler up there but the deck on the Dixiechopper just wouldn't let it go. Anyway, tonight I did my first paying customer, unfortunatly it was a Camaro but hey, there money's green. Still, it made 400 rwhp and it was N/A.

For you guys who dont know I've purchased a Dynojet 224x mobile dyno on a 24ft trailor. Unlike the huge 8ft tall ones this one is only 3ft off the ground and can be pulled with a F150 as it only wieghs around 6,000 lbs. I'm in Jasper but I do travel, I hope to be at most of the dragstrips with it this year.

The only rules I have is I wont setup in Trussville for respect of Walker's nor close to SpeedDreamz in Tuscaloosa.

I also do SCT and Diablo Ford tuning and I have some good contacts for GM.

Just let me know if I can help. www.Bamachips.com or 205-302-0231.

Thanks, Doug.
Doug904 is offline   Reply With Quote
Old 12-28-2006, 09:53 PM   #2
rtusnake
Halfshaft Killer
 
rtusnake's Avatar
 
Join Date: Mar 2005
Location: The Kingdom
Posts: 3,910
Can you seriously dyno four wheelers? I would like to see what mine is making
__________________
03 Cobra
06 F250
(\__/)
(='.'=)
(")_(")
rtusnake is offline   Reply With Quote
Old 12-28-2006, 10:55 PM   #3
ChipR4cam
You can call me mister.
 
ChipR4cam's Avatar
 
Join Date: Jan 2005
Location: Plenty recovered.
Posts: 3,518
Quote:
Originally Posted by rtusnake View Post
Can you seriously dyno four wheelers? I would like to see what mine is making
enough to nearly put me on my ass in 3rd gear.
ChipR4cam is offline   Reply With Quote
Old 12-28-2006, 11:03 PM   #4
rtusnake
Halfshaft Killer
 
rtusnake's Avatar
 
Join Date: Mar 2005
Location: The Kingdom
Posts: 3,910
Quote:
Originally Posted by ChipR4cam View Post
enough to nearly put me on my ass in 3rd gear.
__________________
03 Cobra
06 F250
(\__/)
(='.'=)
(")_(")
rtusnake is offline   Reply With Quote
Old 12-28-2006, 11:55 PM   #5
SvoBrown
Senior Member
 
SvoBrown's Avatar
 
Join Date: Nov 2005
Location: Graham AL
Posts: 1,461
Doug, Do you know much about the Moates J3 for a LA3? I think I have the software and burn1 to do the chip. Just need a PRO to change fuel and timing in the tune.
I'll drive to you to get it done. You must teach me some stuff as you go.
__________________
''Life's tough... it's even tougher if you're stupid.'' - - John Wayne
SvoBrown is offline   Reply With Quote
Old 12-29-2006, 03:01 AM   #6
EZ SPEED
Friends
 
EZ SPEED's Avatar
 
Join Date: Dec 2004
Location: Tempe Arizona
Posts: 3,029
Cool, glad you finally got it
EZ SPEED is offline   Reply With Quote
Old 12-29-2006, 05:23 AM   #7
NightHawk756
Si vis pacem, para bellum
 
NightHawk756's Avatar
 
Join Date: Dec 2004
Location: Tick-Tock, Tick-Tock.......
Posts: 5,146
Congrats Doug!!
__________________
1989 Saleen SSC
1988 AL DPS SSP
NightHawk756 is offline   Reply With Quote
Old 12-29-2006, 08:04 AM   #8
Crzypny
Senior Member
 
Crzypny's Avatar
 
Join Date: Aug 2005
Location: Hoover, Al
Posts: 576
Quote:
Originally Posted by Doug904 View Post
I've dynoed nearly everything in my yard,


Congrats Doug!

By the way, I may be hitting you up for a tune sometime in the near future.
Crzypny is offline   Reply With Quote
Old 12-29-2006, 12:23 PM   #9
Doug904
Member
 
Join Date: Mar 2005
Posts: 86
Quote:
Originally Posted by rtusnake View Post
Can you seriously dyno four wheelers? I would like to see what mine is making
My 91' 250X made 15rwhp and 25 rwtq after figuring out what to do with it and which gear to have it in. I can also read a/f so this makes for a great tuning aid. Mine come out to a nice 12.5:1 but its completley stock. My roller is one solid roller as some of the larger dynojets have two of them with a flat section in the middle.

I charge less for fourwheelers then for cars. $35 for three pulls or $60 for an hour.
Attached Images
File Type: jpg comparison0.jpg (38.6 KB, 15 views)
File Type: jpg 4wheeler.jpg (36.0 KB, 22 views)

Last edited by Doug904; 12-29-2006 at 12:59 PM.
Doug904 is offline   Reply With Quote
Old 12-29-2006, 01:52 PM   #10
rtusnake
Halfshaft Killer
 
rtusnake's Avatar
 
Join Date: Mar 2005
Location: The Kingdom
Posts: 3,910
Quote:
Originally Posted by Doug904 View Post
My 91' 250X made 15rwhp and 25 rwtq after figuring out what to do with it and which gear to have it in. I can also read a/f so this makes for a great tuning aid. Mine come out to a nice 12.5:1 but its completley stock. My roller is one solid roller as some of the larger dynojets have two of them with a flat section in the middle.

I charge less for fourwheelers then for cars. $35 for three pulls or $60 for an hour.
Cool I'll get my buddy to bring his with me so it won't just be one four wheeler. My first fourwheeler was a 250x. Mine was white and red. Fun atv's. Oh yeah what gear do you dyno them in? I had my bike dynoed once and they put it in 6th gear. Didn't seem like that would be the way to do it
__________________
03 Cobra
06 F250
(\__/)
(='.'=)
(")_(")
rtusnake is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:56 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.