12-26-2006, 09:52 PM | #1 |
Senior Member
Join Date: Oct 2006
Location: at your moms
Posts: 407
|
351 motor mount help
ok now i need some motor mounts, but i dont know if the stock 5.0 mounts will work or i need to get some special mounts? but as i recall the bottom end on the 351 has the same style bottom end like the 302. but we swapped out a 289 for a 351 in a 68 mustang and every thing fit in there like a glove, even the stock motor mounts from the 289 bolted on the 351.
also will a stock style 5.0 flywheel and clutch assembly work on the 351 conversion, and i have a t-5 transmission that came out of a 95 mustang. is there anything there i need to change to adapt it to the 351?
__________________
13.068 @ 102 with a 1.732 60 ft, 4:30 gears and drag radials, 2.5 inch exaust, x pipe w/ flowmasters, stock motor and trans |
12-26-2006, 09:53 PM | #2 |
Senior Member
Join Date: Oct 2006
Location: at your moms
Posts: 407
|
**this is going in to a 84 mustang coupe**
__________________
13.068 @ 102 with a 1.732 60 ft, 4:30 gears and drag radials, 2.5 inch exaust, x pipe w/ flowmasters, stock motor and trans |
12-26-2006, 11:14 PM | #3 | ||
Daddy x4 ...we're done
Join Date: Dec 2004
Location: Oxford, AL
Posts: 11,551
|
Quote:
Quote:
On a side note, a lot of aluminum flywheels come zero balanced and have bolt-on weights for 28 and 50 ounce motors.
__________________
-Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring |
||
|
|