11-05-2009, 07:06 PM | #1 |
Senior Member
Join Date: Dec 2006
Location: behind Skillet
Posts: 1,356
|
Anybody running a Trick Flow intake
Just wondering if anyone is running a Trick Flow intake. Would it be possible to get a few good pics of the vacuum lines and where they run. I want to double check mine and see if I'm missing something somewhere. Thanks.
|
11-05-2009, 07:37 PM | #2 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
which trickflow? Italian ran one on the small motor and has a trickflow R on the big motor. I think Bandit has his old one on his vert now
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
11-05-2009, 08:39 PM | #3 |
Senior Member
Join Date: Dec 2006
Location: behind Skillet
Posts: 1,356
|
IIRC its the street heat. i know its not the "R"
|
11-05-2009, 08:48 PM | #4 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
You're not missing any vacuum lines. That sucking sound you hear is coming from the driver's seat.
Now being serious, do you think you have a leak, or think you have them hooked up wrong?
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS Last edited by EHardy1971; 11-05-2009 at 09:07 PM. |
11-05-2009, 09:09 PM | #5 |
Senior Member
Join Date: Dec 2006
Location: behind Skillet
Posts: 1,356
|
Both.....I have one that I'm puzzled on so I blocked it off. Its a long hose on the front side. Its just there. If I wasn't going to use it, I would have capped it off under the intake so it wouldn't be an eye sore the first time Dennis and I put it on.
Last edited by 89five0Gt; 11-05-2009 at 09:15 PM. |
11-05-2009, 09:14 PM | #6 |
Senior Member
Join Date: Dec 2006
Location: behind Skillet
Posts: 1,356
|
To make it clear to others, I've been running this exact combo for years. 92lx did most of the work on it and it ran great. Last year, I rebuilt the motor to freshen things up really, same combo. I did most of it myself and thats probably why its screwed up. Just troubleshooting is all. Preston said he would work on it, but it won't make it to J'ville. I don't think so anyways.
|
11-05-2009, 09:19 PM | #7 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
That sounds like the one that goes to the fuel evap purge solenoid on the pass side fender area. Look for a little cylinder, with an electrical plug on one end, and two vacuum fittings on the other end. One side of the vacuum should have a line coming from the firewall (actually from the fuel tank), and the other side should run to the vacuum port on the front of the upper intake where you mentioned that line was at.
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
|
|