View Full Version : My first attempt at a Knife edges intake
coreydaniel
06-29-2009, 07:16 PM
Tis is my first knife edged intake. It took about 5 hours, im looking for comments or criticism for my next time.
http://i223.photobucket.com/albums/dd258/babybuggyboo_2007/Car%20pics/coreyspics004.jpg
http://i223.photobucket.com/albums/dd258/babybuggyboo_2007/Car%20pics/coreyspics005.jpg
SlowJoe
06-29-2009, 07:20 PM
looks good i would make the flat part in the middle pointy
coreydaniel
06-29-2009, 07:44 PM
yeah i was going to but my cutting bit has had it, and my hands hurt,lol. I may finish it out though.
SlowJoe
06-29-2009, 07:52 PM
are u going to gut the upper?
coreydaniel
07-02-2009, 07:37 PM
i have a custom upper, it is fitted with a 70mm throttle body from a previous 5.0 car.
EHardy1971
07-02-2009, 09:18 PM
looks good i would make the flat part in the middle pointy
:stupid: Also,get yourself some dial calipers,and make sure all of the ports are as close to the same size as possible. Otherwise you'll be doing more harm than good.:nice:
SlowJoe
07-03-2009, 11:17 AM
Are u gona port the runners? wish i could find some pics of the one i done. i think i lowered the center a little.
nxcoupe
10-01-2009, 08:32 AM
So a 5.0 throttle body will work on it? Just as stocker, is that larger than the 4cyl by how much?
coupe
10-01-2009, 09:41 AM
2.3 turbo TB's are very tiny. The most common "upgrade" is a regular SN95 (pushrod) throttlebody (60mm), which has the correct orientation on the blade linkage, TPS, and mounting position. Only thing about it is the 4-bolt pattern is on a larger square, so needs some sort of adapter made or holes drilled/machined... Stock SN95 TB's are usually cheap-to-free but take a bit of work to get on there... it's a GREAT upgrade!
nxcoupe
10-01-2009, 12:40 PM
Cool thanks Matt. I was wondering about that. that's why I asked. I remember the 4cyl having more of an SN95 shape to it.
vBulletin® v3.8.2, Copyright ©2000-2024, Jelsoft Enterprises Ltd.