PDA

View Full Version : fuel injector rebuild

SlowJoe
07-19-2009, 03:06 PM
anyone know where i can get a rebuild kit for the 35lbs injectors? or somewhere i can send them to have them cleaned?

also i have a set of brown ones (stock) and black ones with green band(aftermarket) which would be the best?
SlowJoe
07-19-2009, 03:42 PM
i have came up with this the stock (brown) are pintle-types. and the others are disc type. the pintle type have a fog type spray and the disc are more of a stream which is not all that great. so i will do the stock ones.
rtusnake
07-19-2009, 06:09 PM
I used witchhunter one time to do a rebuild on my injectors. Great service and turn around. They are in washington though iirc
ncontt
07-19-2009, 09:25 PM
RC engineering (??)
SlowJoe
07-19-2009, 09:30 PM
RC engineering (??)

they want a 100 for 4 injectors
SvoBrown
07-25-2009, 06:58 AM
Buy new injectors. Those are over 20 years old, All they do to them are clean and replace caps and o-rings. The insides can't be rebuilt.
I have seen a lot of them come back and start leaking after a few miles.
I have rc #55 injectors on mine now. No problems at all.
qkjuicedpony
07-25-2009, 07:07 AM
If you really want them cleaned and tested them pm 1TONY1 on SCF.

He lives in Ringgold and does them
SvoBrown
07-25-2009, 07:27 AM
I know some guys up there in ringgold. Nice place to visit!!!

Cleaned and tested is the key word. If they are bad in most cases they will find out then.
SlowJoe
07-25-2009, 10:49 AM
i forgot about him! thx