03 GT first time dyno

[01silver freak]

Took my car for its and my first dyno ever since ive always been curious to see what my actual numbers were. I'll try to get the graphs on here Soon but the car made 308.7HP @3700RPM (308.7HP@3700RPM) and 490.6TQ @2900RPM on its first pull. The torque is WAY OFF but ill go with it :jester:
Run 2 was 304.7/485.5
Run 3 was 300.7/461.3

Humidity was at 50% and it was also 98.8 degrees!

[QWKSNKE]

Not trashing your numbers but your hp is off too. HP readings are a direct calculation of the torque readings. So if the torque numbers are off with the dyno, than the whole thing is a wash because it can't calculate HP either. Did C.A.M dyno it?

Aside from that, unless you were spraying nitrous on the pulls, there is no way a 2v car can put down that much HP with the mods in your sig.

Again, I am not being a jackass. Just trying to help you out. Whoever dyno'd it, needs to refund your money or give you some more pulls when they get the machine fixed

[TheJeanyus]

Yep, the load calculations are way off on that dyno. :yup:

[01silver freak]

Sadly the car will probably sold before i can take it to reputatle shop i figured i would of seen 270ish.

[rtusnake]

How much is 3 pulls there?

[01silver freak]

It was 50$ but normally i have no clue how much it cost.

[EHardy1971]

Not trashing your numbers but your hp is off too. HP readings are a direct calculation of the torque readings. So if the torque numbers are off with the dyno, than the whole thing is a wash because it can't calculate HP either. Did C.A.M dyno it?

Aside from that, unless you were spraying nitrous on the pulls, there is no way a 2v car can put down that much HP with the mods in your sig.

Again, I am not being a jackass. Just trying to help you out. Whoever dyno'd it, needs to refund your money or give you some more pulls when they get the machine fixed
:agree: Especially on the bolded part. Those torque numbers are in modded Lightning/Terminator territory.

[banditmwp]

Did they do the dyno pull in 4th gear? :shrug:

Just thinking maybe a 3rd gear pull skewed the numbers way out of line.

[yellowSVT]

where did u take it?

[rtusnake]

You know what kind of dyno they use?

[qkjuicedpony]

I need to go dyno my F250 there......maybe I could make 1000hp/2000tq on fuel only there.

[01silver freak]

I need to go dyno my F250 there......maybe I could make 1000hp/2000tq on fuel only there.

I honestly think you would break the dyno with your truck

[tayzoid1]

its a dynocom dyno and the whole issue is they just dont know how to work the dyno yet. we ran a buddies supra first run of the day and was running it all the way to 8800 rpm and the dyno was shutting down at 73 for some odd reason. idk what the deal is, but hell they put a v6 stang on there and said it put down 260 and 320 lol! they knew it wasnt right but they just dont know enough to fix it. im assuming that chris and andrew are just too prideful to call up someone else and ask for a lil help they would rather look like fools than provide service, on a lighter note i did win a free dyno for my ss when i get it back but i will be doing some reasearch and will know why the dyno is acting wierd

[04350Z]

They use a portable dyno.. he dynoed at c.a.m. they were trying to take money and pushing people through. They weren't hooking up anything to read rpms, so the numbers were not accurate.. a friends ls1 car with just some bolt ons dynoed damn near the same.

[tayzoid1]

lol adams car put down even more than that. and from what i understand they had a dyno day at vengence and never hooked anything up to the cars either just put them on and run to get a number and it was accurate. talk to cam, matt, travis, kerry, all of them. im going to see if he will let me and jeff play with it because jeff thinks he can fix it. and has been researching alot about it. andrew kept saying that he put both of their diesel trucks on it and they both put down the same numbers they put down on 2 other dyno's. but i can tell ya something wasnt right and evvveerryy one knew it. except riley, he still thinks his bolt on cam only 302 with a stock intake is making 571tq and 320 hp lol! "but i have the dyno sheet to prove itt!!"

[04350Z]

Lmfao.. the hp numbers are close.. the torque is way wrong.. something is calibrated correctly or incorrect software is being used for that dyno. Either way, it needs to be fixed before they need to do another dyno day.

[EHardy1971]

They need to get their stuff right before charging people to get their cars dynoed, otherwise they won't stay in business very long.

but i can tell ya something wasnt right and evvveerryy one knew it. except riley, he still thinks his bolt on cam only 302 with a stock intake is making 571tq and 320 hp lol! "but i have the dyno sheet to prove itt!!"
Is this the car?

http://i273.photobucket.com/albums/jj228/ehardy1971/Gadsden%20cruise%20in/DSCN0675.jpg

[rtusnake]

Hux's dyno is accurate :jester:

[04350Z]

Yeab, thats the car eric

[EHardy1971]

Yeab, thats the car eric
I don't know what cam he's running, but he has an Explorer intake on it and E7 heads from what I saw at the Gadsden cruise in. With just that and the usual bolt ons, I highly doubt it's putting 320 hp to the wheels N/A. 220 sounds more like it, and that's a high estimate.

[tayzoid1]

Yup but the dyno at c.a.m. Said it put that down lol, and he is jusy shallow enough tonbelieve it and to argue with ya about it lol

[Italian LX]

Yup but the dyno at c.a.m. Said it put that down lol, and he is jusy shallow enough tonbelieve it and to argue with ya about it lol

There's an easy way to fix that attitude... tell him to get off the rollers and take the car to the streets.

There are plenty of cars around Calhoun County that can take a cam-only 302.

[rtusnake]

There's an easy way to fix that attitude... tell him to get off the rollers and take the car to the streets.

There are plenty of cars around Calhoun County that can take a cam-only 302.

Tisk Tisk old man, promoting street racing?






































Hell Yes :metal:

[Italian LX]

Tisk Tisk old man, promoting street racing?
I've got to live vicariously through these young kids. :D

[EHardy1971]

There's an easy way to fix that attitude... tell him to get off the rollers and take the car to the streets.

There are plenty of cars around Calhoun County that can take a cam-only 302.
:yup: Hell, I'll run him as far as that goes.

[04350Z]

I've told him i would run him with bolt ons only. Lol

[tayzoid1]

Lol yeah i have no doubts about my car and he will run just gotta talk him into it lol they even tried to talk me into the torque numbers being a result of him having 4.10's in rear. What a joke. They have an opportunity to make alot of money if they stop making themselves look retarded

[banditmwp]

Please, please, PLEASE tell me they are dynoing cars in the direct drive gear and not a multiplied gear...please?

[04350Z]

I asked if they were in the right gear.

[rtusnake]

Numbers would still be to far off even in the wrong gear imo

[tayzoid1]

Dynoing everything in 4th gear.

[darkside]

evvveerryy one knew it. except riley, he still thinks his bolt on cam only 302 with a stock intake is making 571tq and 320 hp lol! "but i have the dyno sheet to prove itt!!"

thats the funniest shit i've read in a long time:jester: