2003 Silver Cobra

[ChipR4cam]

I'm out of the loop. Badass!!!!!!

[rtusnake]

:banana2:

http://i62.photobucket.com/albums/h85/rtusnake/006-10.jpg

[BLOWN95GT]

what size are those?

[rtusnake]

62's ball bearing

[SlowJoe]

Them look sweet

[89five0Gt]

kickass :metal:

[rtusnake]

Redoing the fuel system again
http://i62.photobucket.com/albums/h85/rtusnake/0022-1.jpg
http://i62.photobucket.com/albums/h85/rtusnake/001-6.jpg
http://i62.photobucket.com/albums/h85/rtusnake/005-17.jpg
http://i62.photobucket.com/albums/h85/rtusnake/006-13.jpg
http://i62.photobucket.com/albums/h85/rtusnake/008-7.jpg

[nxcoupe]

Looks sweet! I did one of those on an 05, made 720 hp on E85, and finally ran out of pump.

[waypastcrazy]

GOT WINGS!How much longer Michael?

[coupe]

I did one of those on an 05, made 720 hp on E85, and finally ran out of pump.Triples on gasoline should be enough pump for a grand or so.

[Dale McPeters]

Triples on gasoline should be enough pump for a grand or so.
coupe,
The last time I talked to them about a setup for the '93 cobra it was 1200hp+ for the triple hat and hp gss walbro pumps on gasoline. E85 is a completely different story.....

rtusnake,
Very nice...:nice:

[rtusnake]

GOT WINGS!How much longer Michael?

Looking like around 3 or 4 months. At least the weather will be cooler :jester: I'm staying on gasoline so the fuel should be up to par

[nxcoupe]

Triples on gasoline should be enough pump for a grand or so.

Sorry, wasn't putting his system down at all. I just assumed everyone knew that you multiply that number by 1.25 approximately and you get what his max would be on gasoline. which is what you said.

[rtusnake]

I do wish we had more e85 pumps around here, we are lucky to have 93 in lincoln though lol

[rtusnake]

New "street" duty wheels

http://i62.photobucket.com/albums/h85/rtusnake/001-7.jpg

[waypastcrazy]

Sharp!

[nxcoupe]

who makes those? Those bogarts? sharp looking!

[rtusnake]

Billet specialties, I got some bogarts also :)

[nxcoupe]

wow, very sweet, that car is bad azz.

[rtusnake]

Blang blang

http://i62.photobucket.com/albums/h85/rtusnake/002-17.jpg

[BLOWN95GT]

Blang blang

http://i62.photobucket.com/albums/h85/rtusnake/002-17.jpg
:drool: Those are sick!!

[rtusnake]

Roll Tide

http://i62.photobucket.com/albums/h85/rtusnake/005-18.jpg

[ncontt]

:lookatme:

[ncontt]

LOL, j/k....those rims are PIMP!!

[89five0Gt]

:metal:

[SMOKNSS]

2003 Cobra RACE car with a one off twins kit, $2K rear wheels for the track, billet specialties for the radials, 2 homes, 22s and full stainless exhaust on the daily and now custom made stickers for the axle ends on the Cobra... you need to cut me in on this street pharmacy action, Michael.

:jester:

[rtusnake]

Lmao you have to much free time at work

[SvoBrown]

It was once told that Chuck Norris ask him for advise on racing.

http://www.amcarguide.com/uncategorized/top-10-facts-about-chuck-norris-and-muscle-cars/

[357stroker]

im looking for some better halfshafts do you no where i can get some

[QWKSNKE]

It was once told that Chuck Norris ask him for advise on racing.

http://www.amcarguide.com/uncategorized/top-10-facts-about-chuck-norris-and-muscle-cars/

:rofl:

[SlowJoe]

sweet!!!!:metal:

[rtusnake]

It was once told that Chuck Norris ask him for advise on racing.

http://www.amcarguide.com/uncategorized/top-10-facts-about-chuck-norris-and-muscle-cars/
:spit:

im looking for some better halfshafts do you no where i can get some

Doesn't really get much better than stock ones. Been there a few times

[357stroker]

well i broke the passenger side one so think i need some stage 2 or stage 5 ones

[rtusnake]

What tire was you on? I broke a set of Dss axles as well

[rtusnake]

Finally started on the motor :)
http://i62.photobucket.com/albums/h85/rtusnake/003-17.jpg
http://i62.photobucket.com/albums/h85/rtusnake/006-14.jpg
http://i62.photobucket.com/albums/h85/rtusnake/005-19.jpg
http://i62.photobucket.com/albums/h85/rtusnake/004-14.jpg
http://i62.photobucket.com/albums/h85/rtusnake/007-11.jpg

[SilverBack]

Nice! Those rods look pretty serious.

[EHardy1971]

Teksid block?

[SlowJoe]

:metal:

[rtusnake]

Nice! Those rods look pretty serious.
I hope so as much as they cost :popcorn:
Teksid block?

Yeap, 99 block

[coupe]

Crower Rod? Pic is a little blurry.

[rtusnake]

Manley billet Ibeams. Taking pics with my phone so the rest will probably be blurry to :jester:

[SMOKNSS]

Weaksauce.....

:D


Glad to see you and Eric making some progress.

[rtusnake]

Went back to the bbq place saturday as well to scope out the hoes lmao

[SMOKNSS]

Went back to the bbq place saturday as well to scope out the hoes lmao

LMAO!!! I figured you would. Eric needs to find a better place to scope out hoes. That one waitress is going to kill him if she sees him looking at that young girl in the back.LOL!!!

[rtusnake]

Went to work on the motor today, went bowling most of the day instead lol. Did get the heads setup with setup springs. Should check over a few things next weekend and start assembly

[SlowJoe]

:popcorn:

[coupe]

I was wondering if you'd abandoned this project in favor of the Diesel. :shrug:

[rtusnake]

I was wondering if you'd abandoned this project in favor of the Diesel. :shrug:

Depends on which week it is :)

[SMOKNSS]

Depends on which week it is :)

This is true...

At the rate you are going you will have a race ready F350 instead of the Cobra. Maybe you should build the almighty T-bird to race instead.:jester:

[BLOWN95GT]

Any progress Im ready to see those twin hair dryer's spooling!
:turbo::turbo:

[rtusnake]

Ordering the computer system next Friday. Motor is almost ready to put together

[EHardy1971]

Can't wait to see it up and running again! :nice:

[rtusnake]

New coil covers. Trans, standalone and brakes should be here in a couple weeks

http://i62.photobucket.com/albums/h85/rtusnake/027-3.jpg

[banditmwp]

New coil covers. Trans, standalone and brakes should be here in a couple weeks

http://i62.photobucket.com/albums/h85/rtusnake/027-3.jpg

You must really not want this thing to run ever again...why didn't you engrave a bowtie on there too?

[TheJeanyus]

New coil covers. Trans, standalone and brakes should be here in a couple weeks

http://i62.photobucket.com/albums/h85/rtusnake/027-3.jpg
Are you getting them powder coated crimson? :pimp:

[rtusnake]

Lol it does have some chebby parts going in it.

Going to polish them and do the inlays in crimson

[EZ SPEED]

sweet !!

[lukem80]

dude that is pretty sweet

[coupe]

Lol it does have some chebby parts going in it.

Going to polish them and do the inlays in crimson


:spit:


oh wait... you're being serious. :D

[waypastcrazy]

You lost me at chebby parts.:sleeping:

[rtusnake]

Brakes came in today

http://i62.photobucket.com/albums/h85/rtusnake/009-5.jpg

[EHardy1971]

Aerospace brakes? Pimpin' ain't easy! :jester::eric:

[rtusnake]

I just gotta pick them spindles up from you now lol

[EHardy1971]

I just gotta pick them spindles up from you now lol
:nice:

[EZ SPEED]

Damn...nice brakes !! :bling::eric:

[TheJeanyus]

Why do you need brakes on a car that doesn't move under it's own power? :jester: :poke:

[rtusnake]

I saw them and saw the bling of em. Had to get em :jester:

[ncontt]

Aerospace brakes? Pimpin' ain't easy! :jester::eric:

$H!T, it is for some folks.....:metal:

[EHardy1971]

Why do you need brakes on a car that doesn't move under it's own power? :jester: :poke:
:spit:
$H!T, it is for some folks.....:metal:
:lol:

[ncontt]

Just sayin', it ain't braggin' if you done it!!!! By the way....those brakes = :hump:

[rtusnake]

I'm having classes if anyone would like to attend. Just sign up for " Bad Investments 101" :jester:

[asilver2001gt]

I'm having classes if anyone would like to attend. Just sign up for " Bad Investments 101" :jester:

sorry i'll pass...i aced that course a few years ago

[BLOWN95GT]

Im working on my masters in that class at the moment and graduation is a long way off:chug:

[ncontt]

I'm having classes if anyone would like to attend. Just sign up for " Bad Investments 101" :jester:

lookin like you took "PIMPIN' 304" from EZSPEED......just sayin'....lol :metal:

[ncontt]

you'll notice that is a 300 level course and you will have had to have taken Pimpin' 101 (intro to pimpin'), Pimpin' 202 (keepin' the pimp hand strong) in that order to even be considered for this high level class....

[rtusnake]

Haha, if I had erics money I would burn mine :jester:

[EZ SPEED]

Haha, if I had erics money I would burn mine :jester:


Yeah..the problem is...I never have any money....banks are just dumb enough to keep giving me money and it flows through my hands faster than water. LOL

[rtusnake]

^ This man speaks the truth

[QWKSNKE]

you'll notice that is a 300 level course and you will have had to have taken Pimpin' 101 (intro to pimpin'), Pimpin' 202 (keepin' the pimp hand strong) in that order to even be considered for this high level class....

:spit: :rofl:

[lukem80]

I wonder if there is a place that you can get these brakes gold plated at?

[coupe]

Yea, I've noticed a couple of you guys blow money like Charlie Sheen...

http://mastabeta.com/forum/images/smilies/spy.gif:hiding:

[rtusnake]

I wonder if there is a place that you can get these brakes gold plated at?

As long as it's white gold :banana:

[BLOWN95GT]

Yea, I've noticed a couple of you guys blow money like Charlie Sheen...

http://mastabeta.com/forum/images/smilies/spy.gif:hiding:
Coming from the guy with a VIPER!:eric:

[EZ SPEED]

coming from the guy with a viper!:eric:

l m a o !!

[EHardy1971]

Coming from the guy with a VIPER!:eric:
And about 20 other cars. :jester:

[lukem80]

ya'll jelly

[rtusnake]

Rears mounted, just gotta finish plumbing them. Feels good to start putting parts BACK on the car lol

http://i62.photobucket.com/albums/h85/rtusnake/006-18.jpg

[EHardy1971]

Looking good man!

[waypastcrazy]

:pimp:

[qkjuicedpony]

How much cocaine did Charlie Sheen do?











































































Enough to kill 2 and a half men!!!!

:D

[EHardy1971]

:lol:

[rtusnake]

Race car steering
http://i62.photobucket.com/albums/h85/rtusnake/009-7.jpg
Turbo snuggies and trans dipstick
http://i62.photobucket.com/albums/h85/rtusnake/0082.jpg

[SlowJoe]

when did a 6 speed need a dip stick?

[Dale McPeters]

How much cocaine did Charlie Sheen do?

Enough to kill 2 and a half men!!!!

:D

:spit:.......:rofl:

Nice job rtusnake...:nice:

[rtusnake]

when did a 6 speed need a dip stick?

Sold it a couple months ago :chug:

[ncontt]

Race car steering
http://i62.photobucket.com/albums/h85/rtusnake/009-7.jpg
Turbo snuggies and trans dipstick
http://i62.photobucket.com/albums/h85/rtusnake/0082.jpg

:eric: bling-a-ling!! :metal:

[SlowJoe]

Sold it a couple months ago :chug:

thats where the chevy comes in!

[waypastcrazy]

Sold it a couple months ago :chug:
Yea he had to use chevy parts.
Its the only way to make a dam ford run.

[rtusnake]

I'm going to put a ford racing sticker on the trans when it comes in to make myself feel better

[SlowJoe]

I'm going to put a ford racing sticker on the trans when it comes in to make myself feel better

:rolleyes:

[coupe]

So... Is this now going to basically be a carbon copy of Tim's setup?

I don't blame you if it is.

[93cobra1928]

So... Is this now going to basically be a carbon copy of Tim's setup?

I don't blame you if it is.

Oswalt?

[rtusnake]

For the most part, small differences and more boost

[ncontt]

more boost is more better....

[waypastcrazy]

How much weight did you drop on just the brake swap?thx Clyde

[rtusnake]

I believe it was around 45lbs total. Its not as drastic on mine since I have a more street friendly setup with the vented rotors

[waypastcrazy]

I believe it was around 45lbs total. Its not as drastic on mine since I have a more street friendly setup with the vented rotorsDang that is still a good weight savings.darn nice build for sure i love it.

[rtusnake]

Fronts be on.

http://i62.photobucket.com/albums/h85/rtusnake/005-22.jpg

[ncontt]

:eric:

[rtusnake]

Thrust bearing mod on the rear main and bigger pivot studs for timing chains
http://i62.photobucket.com/albums/h85/rtusnake/012-7.jpg
http://i62.photobucket.com/albums/h85/rtusnake/013-5.jpg

[rtusnake]

Blurry electric water pump. Cost extra with the blur vision
http://i62.photobucket.com/albums/h85/rtusnake/018-3.jpg
9.5" ptc convertor
http://i62.photobucket.com/albums/h85/rtusnake/0082-3.jpg
Some rollcage action
http://i62.photobucket.com/albums/h85/rtusnake/019-4.jpg

[rtusnake]

Corn pumps
http://i62.photobucket.com/albums/h85/rtusnake/016-2.jpg
http://i62.photobucket.com/albums/h85/rtusnake/017-4.jpg

[BLOWN95GT]

This is going to be one sick snake when its done! Where did you get the cage from? I thought about buying one myself just to keep from getting kicked out of the track but don't know which direction to go is that a bolt in or weld in kit?

[QWKSNKE]

Corn pumps


So you are swapping to the corn? Where can you buy it? I haven't seen a place in my area

[rtusnake]

This is going to be one sick snake when its done! Where did you get the cage from? I thought about buying one myself just to keep from getting kicked out of the track but don't know which direction to go is that a bolt in or weld in kit?
Most tracks around here won't say anything if you don't have a cage. This cage is from Mia motorsports, guy came from the southernoutlaw shop. It's a weld in 10pt cage
So you are swapping to the corn? Where can you buy it? I haven't seen a place in my area

Birmingham area and Reese city are the closest areas. I have a few 55 gallon platic drums from work that I'm going to use to store it at home

[TheJeanyus]

Birmingham area and Reese city are the closest areas. I have a few 55 gallon platic drums from work that I'm going to use to store it at home

That sounds like a huge pain in the ass to me...lol.

[rtusnake]

Gotta pay to play as they say

[QWKSNKE]

I know you can make big powa with it. Seems like GI Joe is around 836rwhp on the corn

[qkjuicedpony]

I can get you some drums of E98.

[rtusnake]

How much is a drum of E98?

[qkjuicedpony]

Let me check prices tomorrow.

[rtusnake]

Rear shocks
http://i62.photobucket.com/albums/h85/rtusnake/003-23.jpg

[rtusnake]

Third member, they sent me a coupler instead of a yoke. Waiting for the yoke to come in

http://i62.photobucket.com/albums/h85/rtusnake/0082-4.jpg

[rtusnake]

Injectors

http://i62.photobucket.com/albums/h85/rtusnake/003-24.jpg

[SvoBrown]

They look huge! Those are your feet at the bottom of the picture!

[SlowJoe]

Thank they are on a glass table.

[rtusnake]

Lol that's what everyone says about the pic, they are 225# though

[SlowJoe]

dont need big ones for little HP:jester:

[rtusnake]

Puzzle is coming together
http://i62.photobucket.com/albums/h85/rtusnake/003-25.jpg

[04350Z]

Can't hide money, michael!

[rtusnake]

Over two years it's not so bad lol

[ncontt]

Can't hide money, michael! :yup:

[ncontt]

Over two years it's not so bad lol

blah, over 2 years....ROOKIES, ROOKIES I say!.....mine feels like an eternity!!!

[rtusnake]

Well it will be two years in November to be exact lol

[ncontt]

well let's GIT ER DONE DEN!! :chug:

[rtusnake]

We set the ring gaps this weekend, probably going to watch a race next weekend and put the shortblock together

[yellowSVT]

take ur time then u know it is right, im getting closer!

[BLOWN95GT]

Can't wait to see what this thing runs this time.

[rtusnake]

Axles came in today, hope to have the shortblock done saturday and bolt the heads down

http://i62.photobucket.com/albums/h85/rtusnake/022-4.jpg

[waypastcrazy]

Vroom!Vroom!
Nice!

[ncontt]

dammit boy, you not pinchin' any pennies on this one are you? LOL
:eric:

[waypastcrazy]

Think I will have some King Cobra stickers made up for you Michael.lol

[rtusnake]

dammit boy, you not pinchin' any pennies on this one are you? LOL
:eric:

I hadnt planned on doing axles but the splines on my 31s was twisted so went a few steps ahead :meth:

[ncontt]

I hadnt planned on doing axles but the splines on my 31s was twisted so went a few steps ahead :meth:

Ya, I now how that goes, one thing snowballs into one other thing, into one other thing...etc, etc!

[SlowJoe]

sweet do you thank they will break????? Let me test them out!!!!!!!:jester:

[jonosranger]

sweet do you thank they will break????? Let me test them out!!!!!!!:jester:
U dont even have anything that runs!:jester::jester:

[rtusnake]

sweet do you thank they will break????? Let me test them out!!!!!!!:jester:

Hopefully my axle breaking days will be over for awhile lol

[rtusnake]

FINALLY finished the shortblock up. Heads are almost ready to bolt up and time the cams in.

http://i62.photobucket.com/albums/h85/rtusnake/005-26.jpg
http://i62.photobucket.com/albums/h85/rtusnake/004-21.jpg

[ncontt]

:chug:

[coupe]

What's the specs on the pistons, ring gaps, clearances, etc??


Oh, and it's missing 2 cylinders. :D

http://www.viperalley.com/classifieds/data/5/HPIM0663.JPG

[rtusnake]

Pistons are 9cc with .070 notch on the intake side, .0035 ptw iirc. Rings are .026 top and .028 bottom. Also pistons are .020 overbore

[ncontt]

Oh, and it's missing 2 cylinders. :D

http://www.viperalley.com/classifieds/data/5/HPIM0663.JPG
speaking of :eric:

[coupe]

speaking of :eric:I wish. :rofl: Not my crate motor... just a pic off the web.

[rtusnake]

I wish. :rofl: Not my crate motor... just a pic off the web.


Suuurrrreeee it is :)

[waypastcrazy]

[QUOTE=coupe;217724]What's the specs on the pistons, ring gaps, clearances, etc??


Oh, and it's missing 2 cylinders.
If the bore and stroke is big enough it wont need 2 more cylinders!:jester:

[coupe]

If the bore and stroke is big enough it wont need 2 more cylinders!It's a mod-motor... the bore and stroke will never be big enough. http://anchoredbygrace.com/smileys/sm199.gif

...but the turbos will definitely compensate.

[rtusnake]

It's a mod-motor... the bore and stroke will never be big enough. http://anchoredbygrace.com/smileys/sm199.gif

...but the turbos will definitely compensate.

They love da boost

[waypastcrazy]

It's a mod-motor... the bore and stroke will never be big enough. http://anchoredbygrace.com/smileys/sm199.gif

...but the turbos will definitely compensate. no doubt!
Its going to be one bad mutha!

[rog50]

Sweeeeeeeeeeeeeeeeeeet!!!!!!!!!!!!!!!!!!!!!!!!!

[rtusnake]

http://i62.photobucket.com/albums/h85/rtusnake/010-14.jpg
http://i62.photobucket.com/albums/h85/rtusnake/011-11.jpg

[mustangmuscle]

How long before you fire it up? :wave:

[rtusnake]

Hopefully sometime around november. How you been stranger?

[rtusnake]

Motor is done, always fun degreeing four cams. Brake lines are done. Should bring the car down in a few weeks to start on the cage, wiring, and sitting the motor and trans in

[rtusnake]

motorplates came in today, still waiting on the midplate

http://i62.photobucket.com/albums/h85/rtusnake/006-23.jpg

[BLOWN95GT]

Have you started the cage yet?

[rtusnake]

No lol, believe this car maybe my retirement gift

[BLOWN95GT]

Yea I keep waiting for the video of the car starting up every time I see a new post by you in this thread. I don't know how you have waited this long. I thought a year and a half was a long time for mine.

[rtusnake]

It's not to hard to wait when you don't have the cash lol

[rtusnake]

More brake parts

http://i62.photobucket.com/albums/h85/rtusnake/002-25.jpg

[rtusnake]

http://i62.photobucket.com/albums/h85/rtusnake/0022-3.jpg

[BLOWN95GT]

http://i62.photobucket.com/albums/h85/rtusnake/0022-3.jpg
remove before flight!:popcorn:

[EHardy1971]

:ohsnap:

[rtusnake]

Finally have the car rolling around again and also mounted the parachute mount.

http://i62.photobucket.com/albums/h85/rtusnake/003-28.jpg
http://i62.photobucket.com/albums/h85/rtusnake/004-22.jpg
http://i62.photobucket.com/albums/h85/rtusnake/005-27.jpg

[BLOWN95GT]

Looks sweet I'd like to find one that mounts behind the tag.

[rtusnake]

It would take from fab work to make one work like that, possibly could be tied into a rollcage maybe

[SvoBrown]

I've got to get back in the shop! your having all the fun!!!!

[waypastcrazy]

Looks sweet!

[SlowJoe]

bout time!!!!!!!!! looking good:drool:

[rtusnake]

Time to get down
http://i62.photobucket.com/albums/h85/rtusnake/006-24.jpg

[BLOWN95GT]

Time to get down
http://i62.photobucket.com/albums/h85/rtusnake/006-24.jpg
is that a mig or tig?
I want a welder so bad I can taste it!:metal:
I would like a tig welder though so I could build my own turbo kits

[rtusnake]

Its a tig, I already had a mig welder. This one is pretty nice for the price. Great welder for a first time tig user

[BLOWN95GT]

Its a tig, I already had a mig welder. This one is pretty nice for the price. Great welder for a first time tig user
Where did you buy it from and what kind of price are we talking about?

[rtusnake]

I bought mine for baker welding supply for $1700

[waypastcrazy]

Nice welder.

[SlowJoe]

Where does that mount:jester:

[TheJeanyus]

So is this car actually going to move under its own power in 2012? :jester: :poke:

[BLOWN95GT]

So is this car actually going to move under its own power in 2012? :jester: :poke:
Does coasting in neutral count?:jester:

[ncontt]

:spit:

[rtusnake]

Lol I hope it runs this year but not getting my hopes up

[yellowSVT]

i under stand the having to wait for cash, LOL yours is way more than mine but i have more mouths to feed, LOL

[rtusnake]

This is true, as far as I know anyways lol

[rtusnake]

Getting ready to put the cage in

http://i62.photobucket.com/albums/h85/rtusnake/051-1.jpg
http://i62.photobucket.com/albums/h85/rtusnake/052-2.jpg

[SvoBrown]

Will be a fun time rolling into the seat. your still a little guy so it will show how young you are.

[SlowJoe]

looking good!!! And damn what a hammer:jester:

[rtusnake]

That's my get shit done hammer lol

[yellowSVT]

Lol!!!!!!!!!!!!!!!!!

[waypastcrazy]

Getting ready to put the cage in

http://i62.photobucket.com/albums/h85/rtusnake/051-1.jpg
http://i62.photobucket.com/albums/h85/rtusnake/052-2.jpgLooks like crap.:jester:
Hurry Up!The anticipation is driving me nuts.lol

[coupe]

That's my get shit done hammer lol

Called a "Ford" tool.

[rtusnake]

I have several "hammers" around lol

[SlowJoe]

hammers and my fingers dont get along:jester:

[rtusnake]

This is true, most of my fingernails are new so to speak lol

[rtusnake]

And btw new intake came in today

http://i62.photobucket.com/albums/h85/rtusnake/056.jpg

[waypastcrazy]

Lookn sweet!

[SvoBrown]

WOW. That is a nice piece of work.

[rtusnake]

Teaser pic
http://i62.photobucket.com/albums/h85/rtusnake/051-2.jpg

[ncontt]

ummmm, ya, I just blushed in my pants I think.....

[rtusnake]

Gt lash adjusters and rockers came in today

http://i62.photobucket.com/albums/h85/rtusnake/photo-1.jpg

[EHardy1971]

How much longer before it's alive again?

[rtusnake]

Thats the million dollar question lol. No idea really. Ordering the dry sump tomorrow so thats another big hurdle out of the way

[waypastcrazy]

Ok have to ask.How much did the reynolds wrap set ya back?:jester:

[EZ SPEED]

and btw new intake came in today

http://i62.photobucket.com/albums/h85/rtusnake/056.jpg

badd asss !!!!

[coupe]

When will we see it all for sale in classifieds? :jester:

[rtusnake]

Ok have to ask.How much did the reynolds wrap set ya back?:jester:

I used my summit bucks to get it lol

[rtusnake]

When will we see it all for sale in classifieds? :jester:

Depends on when those DNA tests come back. Got a Maury show next week :jester:

[coupe]

Congratulations! :D

[EHardy1971]

Depends on when those DNA tests come back. Got a Maury show next week :jester:
:spit:

[rtusnake]

Dry sump came in yesterday

http://i62.photobucket.com/albums/h85/rtusnake/photo-3.jpg

[EZ SPEED]

Dry sump came in yesterday


:nice: wicked!

[ncontt]

ya...that looks expensive! ROCK ON! \m/ \m/

[EHardy1971]

Hogan intake?

[rtusnake]

Its a berry motorsports intake. All cnc work

[ncontt]

Its a ballin' motorsports intake. All cnc work

*fixed* ;) :eric:

[rtusnake]

New huffers thanks to Reed at work turbochargers. There is two, other turbo is the 2fiddy turbo. Hopefully will get the old subframes cut out this weekend and start getting the wolfe ones in.

http://i62.photobucket.com/albums/h85/rtusnake/007-20.jpg

[EZ SPEED]

:chug:

[coupe]

Nice turbo. Borg Warner stuff really makes the power!

[rtusnake]

Hoping to get more modular cars using them once I get mine running.

[ncontt]

would love a bigger turbo but hell, I can't get this transmission straight...LOL

[EHardy1971]

Hoping to get more modular cars using them if I ever get mine running.
Fixed. :jester:

[rtusnake]

Takes awhile, don't make that big money like you depot :jester:

[rtusnake]

Parachute mount
http://i62.photobucket.com/albums/h85/rtusnake/80D689E0-E3E8-44D9-A381-1C89A823CC84-13043-00000E81122471A8.jpg

[rtusnake]

Cut out the old subframes in favor of wolf subs
http://i62.photobucket.com/albums/h85/rtusnake/FB9035C9-8220-48E2-9C2D-6E79A1F6A45E-13043-00000E811AE253F2.jpg
http://i62.photobucket.com/albums/h85/rtusnake/99BCC9DD-A1F6-4882-9DE4-8DA775E180B4-13043-00000E81237F5E4F.jpg

[SvoBrown]

Much better. I installed full sub-frames in one fox body. Lower bolted into it. Was a lot of work!!

[rtusnake]

Yeah cutting out the old ones sucked a big one. At least I can tie these into the cage

[rtusnake]

Parachute mounted
http://i62.photobucket.com/albums/h85/rtusnake/52ABD6C1-3956-47E0-9625-AFD751A97859-15276-000011BAD92242D2-1.jpg
http://i62.photobucket.com/albums/h85/rtusnake/F94B08AA-C82F-4143-AA26-FFED2C403D60-15276-000011BADFDF4901.jpg

[QWKSNKE]

It will dry rot before you get it running :D

[rtusnake]

I'll buy another one :jester:

[waypastcrazy]

:lol:

[qkjuicedpony]

In 20 years this will be a major barn find!!!!

[rtusnake]

It still won't be finished lol

[ncontt]

:lol:

[rtusnake]

Fuel pump
http://i62.photobucket.com/albums/h85/rtusnake/1E4A08FB-7024-4232-986C-16A09CD4A949-10398-00000ACDA574A429.jpg

[SvoBrown]

Makes my little 255 look very inadequate. Looks like it could run a small sub-division.

[rtusnake]

Alot smaller than I was expecting actually lol

[qkjuicedpony]

Race car shit I tell ya

[rtusnake]

Dont get more street car than that, can't even hear the pump running :)

[qkjuicedpony]

We can't even hear the car running

[EZ SPEED]

We can't even hear the car running

:lol:

[rtusnake]

Says the guy "retired" from racing :jester:

[qkjuicedpony]

Says the guy "retired" from racing :jester:

Working a comeback. All I have right now is a motor on the stand. Looking for a mustang roller or a maverick. Hook me up on the cheap

[rtusnake]

I know of a coupe, I'll ask how much he is wanting