02-06-2008, 03:19 PM | #1 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
nitrous plate install
hey guys its me again and I have what maybe a crazy question but need to know.here goes I have a torker 2 intake with 1 1/2 inch carb spacer and was wondering if anyone has run a spacer with a nitrous plate? if so where would i get best performance? nitrous plate between intake and spacer or nitrous plate between carb and spacer?thx for any info.
|
02-06-2008, 04:24 PM | #2 |
I got a good sugar moma
Join Date: Dec 2005
Location: ON THE ROAD
Posts: 1,196
|
I have not heard of anyone running a spacer with a kit but I would believe I would put it between the intake and the spacer.
__________________
Bottled 89 Coupe |
02-06-2008, 05:05 PM | #3 |
Senior Member
Join Date: Jun 2007
Location: bham and auburn
Posts: 337
|
i would say intake and spacer too just so it atomizes longer and gives it a better burn. but hope it doesnt blow the spacer sky high.
__________________
finally got my avatar. it is the white one. |
02-06-2008, 05:12 PM | #4 |
Dayuuuuuuum!!!!!
Join Date: Dec 2004
Location: Dallas GA
Posts: 2,933
|
get rid of that huge spacer and get a 1/2 inch spacer made out of Birchwood.put the nitrous plate on,then the spacer and then the carb
__________________
86 Mustang Gt......Mods piling up in my garage.
07 F350 dooly.....Tows my fifth wheel |
02-10-2008, 05:18 PM | #5 |
Mine's bigger...
|
Just add a 2nd n2o plate
__________________
323rwhp | 320rwtq - 4VNA 12.13 @ 113.36 | 1.63 60' |
|
|