05-10-2008, 06:57 PM | #1 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
locker rebuild
i got a locker that needs discs put back in it. i want to use the disc out of the locker that is in my car. but my car is a long ways from me and i need to know if i will need special tools for it or what? anyone know where a write up is? i need to get this done tomorrow. so need info quick! thx
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
05-10-2008, 09:13 PM | #2 |
Daddy x4 ...we're done
Join Date: Dec 2004
Location: Oxford, AL
Posts: 11,551
|
Of course, you'll need all the tools necessary to remove the carrier. To rebuild the trac-lock, you'll also need some 2" hose clamps, a vice, and a hammer.
The following is a pretty good article and includeds a section of rebuilding the clutch packs: http://www.corral.net/tech/drivetrain/gears.html Make sure you have some friction modifier if you are using new clutches.
__________________
-Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring |
|
|