07-05-2005, 08:38 AM | #1 |
Resident GM Troll
|
Sway Bar ?
I know you guys aren't C5 techs, but maybe you can answer this. Will I have a problem if I only upgrade my front swaybar to a larger diameter one? I have a good offer on a used Z51 front swaybar (which is only a coule mm smaller than a Z06), but it is a decent bit larger than the one on my base C5. Thanks
__________________
2010 Hyundai Genesis Coupe 2.0T - Bathurst Black Pearl 2007 Ford Fusion SEL (wife's) |
07-05-2005, 12:57 PM | #2 |
Pr0j3ct P1mp T1t3, y0!
Join Date: Dec 2004
Location: Somewhere wondering why Crimson stole my avatar
Posts: 2,022
|
Re: Sway Bar ?
should be fine.
__________________
93 GT----225rwhp/287rwtq--------1/4 mile= (but getting better) |
07-05-2005, 02:05 PM | #3 |
Nothing new here
Join Date: Dec 2004
Location: Senoia, GA
Posts: 2,990
|
Re: Sway Bar ?
I would think it should be fine.
You can check out the stickey on here for more information about sway bars, the generals apply to everything, not just Mustangs. If you go too big, you would probably need to look at increase you spring rates as well.
__________________
1974 Triumph TR6 1985 Monte Carlo SS 1986 Mustang GT 2011 KIA Optima GTS |
07-05-2005, 02:23 PM | #4 |
Resident GM Troll
|
Re: Sway Bar ?
my current setup:
23mm, front; 19.1mm, rear --- FE1/Base new front: 28.6mm, front, the regular matching rear is 23.6mm
__________________
2010 Hyundai Genesis Coupe 2.0T - Bathurst Black Pearl 2007 Ford Fusion SEL (wife's) |
07-05-2005, 02:34 PM | #5 |
*WWIP* Saving for Evo XXI
Join Date: Dec 2004
Location: You like my biodata. B-i-o-d-a-t-a!
Posts: 1,693
|
Re: Sway Bar ?
I would upgrade the rear as well. W/ such a bigger bar your car might be more prone to understeer. Big front sway usually = more understeer.
__________________
08 cbr 1000 73 mach 1 |
|
|