cam questions again

jwillburn119 · 08-13-2005, 05:31 PM

Markings on the end of cam are Z 002. Casting in the side of cam is CWC EP 52 with a purple paint dot.

does anyone know if this is the right cam for a 5.0 HO?

jwillburn119 · 08-14-2005, 02:23 PM

can i use stock (rebuilt) valvetrain with this much lift and duration?

Cam Lift .320 Int .320 Exh, Valve Lift .512 Int. .512 Exh, Lobe Center 107 Int 111 Exh, Adv Dur 292 Int 292 Exh, .050 Dur 230 Int 230 Exh,

QWKSNKE · 08-14-2005, 05:07 PM

wouldn't hurt to have new springs

08-14-2005, 05:13 PM

you will need new springs.....the stockers will float in the upper rpms with that cam

jwillburn119 · 08-14-2005, 05:17 PM

thats kind of what i figured...
i dont have to worry about tapping the valves though?

i have 250 psi beehives on it... it will float still?

uvbnhad · 08-14-2005, 05:21 PM

what kinda of rockers are you going to be using?

coupe · 08-14-2005, 06:26 PM

Man; that cam has a lobe separation angle of 109Âº probably better suited to a carburetor car. And it wll definitely lope. I would not recommend it for a street car.
Are you looking for a stock cam still?

jwillburn119 · 08-15-2005, 05:45 PM

yeah i definately am... i need one, or close to stock...
i want to use "stock", or close to stock rockers... and "stock" (or 250psi springs...)
thats what i got for "STOCK"

if i can have a stock cam... it will be great... the guy that i was working with went AWOL and left me high and dry... so my car is parked in the middle of nowhere... and i am just trying to get it minimal so i can get it back on the road... that way i can finish it up

i got alot of nice stuff... but i couldnt finish the buildup with no notice... so i am scrambling
i am down a cam, 1 main bolt, and tools to put it back together... (he took them with him by accident i guess) i got the tools covered and the main bolt... im just trying to find a cam

Shankin · 08-15-2005, 06:04 PM

For a stock car its hard to beat the lunati 51014. It sounds killer and performs well!

08-15-2005, 06:10 PM

i have a stock cam if you need one...let me know

08-13-2005, 05:31 PM	#1
jwillburn119 Senior Member Join Date: May 2005 Location: temple, tx Posts: 240	cam questions again Markings on the end of cam are Z 002. Casting in the side of cam is CWC EP 52 with a purple paint dot. does anyone know if this is the right cam for a 5.0 HO? __________________ Whats in your WALLET?

08-14-2005, 02:23 PM	#2
jwillburn119 Senior Member Join Date: May 2005 Location: temple, tx Posts: 240	Re: cam questions again can i use stock (rebuilt) valvetrain with this much lift and duration? Cam Lift .320 Int .320 Exh, Valve Lift .512 Int. .512 Exh, Lobe Center 107 Int 111 Exh, Adv Dur 292 Int 292 Exh, .050 Dur 230 Int 230 Exh, __________________ Whats in your WALLET?

08-14-2005, 05:07 PM	#3
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Re: cam questions again wouldn't hurt to have new springs __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

08-14-2005, 05:13 PM	#4
qkjuicedpony Guest Posts: n/a	Re: cam questions again you will need new springs.....the stockers will float in the upper rpms with that cam

08-14-2005, 05:17 PM	#5
jwillburn119 Senior Member Join Date: May 2005 Location: temple, tx Posts: 240	Re: cam questions again thats kind of what i figured... i dont have to worry about tapping the valves though? i have 250 psi beehives on it... it will float still? __________________ Whats in your WALLET?

08-14-2005, 05:21 PM	#6
uvbnhad Friends Join Date: Mar 2005 Location: McCalla Posts: 1,241	Re: cam questions again what kinda of rockers are you going to be using?

08-14-2005, 06:26 PM	#7
coupe Super Moderator Join Date: Dec 2004 Posts: 6,313	Re: cam questions again Man; that cam has a lobe separation angle of 109Âº probably better suited to a carburetor car. And it wll definitely lope. I would not recommend it for a street car. Are you looking for a stock cam still? __________________ " If you can't explain it simply, you don't understand it well enough. " - Albert Einstein

08-15-2005, 05:45 PM	#8
jwillburn119 Senior Member Join Date: May 2005 Location: temple, tx Posts: 240	Re: cam questions again yeah i definately am... i need one, or close to stock... i want to use "stock", or close to stock rockers... and "stock" (or 250psi springs...) thats what i got for "STOCK" if i can have a stock cam... it will be great... the guy that i was working with went AWOL and left me high and dry... so my car is parked in the middle of nowhere... and i am just trying to get it minimal so i can get it back on the road... that way i can finish it up i got alot of nice stuff... but i couldnt finish the buildup with no notice... so i am scrambling i am down a cam, 1 main bolt, and tools to put it back together... (he took them with him by accident i guess) i got the tools covered and the main bolt... im just trying to find a cam __________________ Whats in your WALLET?

08-15-2005, 06:04 PM	#9
Shankin Senior Member Join Date: Jul 2005 Posts: 339	Re: cam questions again For a stock car its hard to beat the lunati 51014. It sounds killer and performs well! __________________ Pro Speed Performance 770 222 5015

08-15-2005, 06:10 PM	#10
qkjuicedpony Guest Posts: n/a	Re: cam questions again i have a stock cam if you need one...let me know