Accel Enrichment Fuel [topic split from other thread]

QWKSNKE · 08-21-2005, 07:23 PM

starts at the next post......

QWKSNKE · 08-23-2005, 03:35 PM

Here is my current tp rate (probably stock)

Dale McPeters · 08-23-2005, 07:46 PM

Ok guys you need to look closely at the Accel Enrichment Fuel Table if you are still using 1.30A9 as the ECT & TP-Rate are backwards from what they should be........................

They are as follows...
ECT = "X"
Tp-Rate = "Y"

They are incorrect in the Caledit 1.30A9 software if I remember correctly as the numbers are not correct...........not sure if Mike ever got the database fixed for this.......

Lee, Email me your transfer sheet for the meter so I can take a look see......

mcpetedl at grandecom dot net (at = @ & dot = . )

86GT · 08-23-2005, 09:14 PM

Quote:

Originally Posted by Dale McPeters

Ok guys you need to look closely at the Accel Enrichment Fuel Table if you are still using 1.30A9 as the ECT & TP-Rate are backwards from what they should be........................

They are as follows...
ECT = "X"
Tp-Rate = "Y"

They are incorrect in the Caledit 1.30A9 software if I remember correctly as the numbers are not correct...........not sure if Mike ever got the database fixed for this.......

Thanks Dale, I remember reading that but totaly forgot about it.

QWKSNKE · 08-24-2005, 07:01 AM

Quote:

Originally Posted by Dale McPeters

Ok guys you need to look closely at the Accel Enrichment Fuel Table if you are still using 1.30A9 as the ECT & TP-Rate are backwards from what they should be........................

They are as follows...
ECT = "X"
Tp-Rate = "Y"

They are incorrect in the Caledit 1.30A9 software if I remember correctly as the numbers are not correct...........not sure if Mike ever got the database fixed for this.......

Forgive my ignorant question but how do I correct this?

Dale McPeters · 08-24-2005, 07:08 AM

OK time for one more before the boring meeting.....

I do not know of anyway to fix it with Caledit.....yet. I had been using GUI-Pro, EEC-Editor or PCMX to edit the binary. Then load the binary with Caledit to the TwEECer.

QWKSNKE · 08-24-2005, 09:57 AM

Quote:

Originally Posted by Dale McPeters

I do not know of anyway to fix it with Caledit.....yet. I had been using GUI-Pro, EEC-Editor or PCMX to edit the binary. Then load the binary with Caledit to the TwEECer.

my headache just went to migraine status

More software to learn I guess. Where do I obtain the above software?

How do I calculate what the correct #'s should be.

Dale McPeters · 08-24-2005, 04:23 PM

Quote:

Originally Posted by QWKSNKE

my headache just went to migraine status

Quote:

Originally Posted by QWKSNKE

More software to learn I guess. Where do I obtain the above software?

Yep at least until Mike gets Caledit where it needs to be....
The PCMX software comes from Kevin Timmerman, I will have to get the link for you after I get home. EEC-Editor I have along with the GUI. The GUI copy that is not licensed is freeware.

Quote:

Originally Posted by QWKSNKE

How do I calculate what the correct #'s should be.

Have not had time to get to my laptop lately maybe this weekend or Friday afternoon? If I do not have to work.

QWKSNKE · 08-25-2005, 05:42 PM

Quote:

Originally Posted by Dale McPeters

Have not had time to get to my laptop lately maybe this weekend or Friday afternoon? If I do not have to work.

Don't forget to blow dust off your little notebook and laptop this weekend and help me out with this.

If it is ok with you, I may go ahead and email my current file for you to look at and maybe correct this particular table (that this thread is about).

Let me know if you have time or are interested.

Dale McPeters · 08-26-2005, 07:31 AM

Will do Lee.

I also sent a pm to thunderstang as he is on the list now. I thought he may be able to help out until I get back but have not heard any reply yet.

(Off Topic)
I am going to send you some binary data locations etc. to add to the download list. I had sent some of them to Jon on the EEC-Tuning site but for some reason they never got posted. This would be for people that want to edit the binary directly or use something other than the TwEECer software. Clint may have some additions to add to what I send as I think he has been hammering on some of them. I just do not have the time to do it as much anymore.
(On Topic)

08-21-2005, 07:23 PM	#1
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Accel Enrichment Fuel [topic split from other thread] starts at the next post......

08-23-2005, 03:35 PM	#2
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Re: datalogging and drivability issues Here is my current tp rate (probably stock)

08-23-2005, 07:46 PM	#3
Dale McPeters 5.0 Block/Walnut Cracker Join Date: May 2005 Location: Working.... Posts: 2,409	Re: datalogging and drivability issues Ok guys you need to look closely at the Accel Enrichment Fuel Table if you are still using 1.30A9 as the ECT & TP-Rate are backwards from what they should be........................ They are as follows... ECT = "X" Tp-Rate = "Y" They are incorrect in the Caledit 1.30A9 software if I remember correctly as the numbers are not correct...........not sure if Mike ever got the database fixed for this....... Lee, Email me your transfer sheet for the meter so I can take a look see...... mcpetedl at grandecom dot net (at = @ & dot = . )

08-24-2005, 07:08 AM	#6
Dale McPeters 5.0 Block/Walnut Cracker Join Date: May 2005 Location: Working.... Posts: 2,409	Re: datalogging and drivability issues OK time for one more before the boring meeting..... I do not know of anyway to fix it with Caledit.....yet. I had been using GUI-Pro, EEC-Editor or PCMX to edit the binary. Then load the binary with Caledit to the TwEECer.

08-26-2005, 07:31 AM	#10
Dale McPeters 5.0 Block/Walnut Cracker Join Date: May 2005 Location: Working.... Posts: 2,409	Re: Accel Enrichment Fuel [topic split from other thread] Will do Lee. I also sent a pm to thunderstang as he is on the list now. I thought he may be able to help out until I get back but have not heard any reply yet. (Off Topic) I am going to send you some binary data locations etc. to add to the download list. I had sent some of them to Jon on the EEC-Tuning site but for some reason they never got posted. This would be for people that want to edit the binary directly or use something other than the TwEECer software. Clint may have some additions to add to what I send as I think he has been hammering on some of them. I just do not have the time to do it as much anymore. (On Topic)