09-10-2005, 09:23 AM | #1 |
Member
Join Date: Aug 2005
Posts: 53
|
First CALCON bug after two years
Calcon has stopped working for me. It logs but everything is zeros, It happened right when I needed the most durring a seven hour road trip to Solana Beach. ARGH
Just for fun, I switched to a known good tune with a working data log. The readings that came up were nonsense though. Any ideas would be most helpful. I can use it on my drive back.
__________________
TT331FB - T3/.6/.63 turbos, Spearco intercooler, 302/331 Mexican Block,AFR 185 heads, 80mm MAF, 75mm TB, 50# injectors, Tweecer, Track Heat intake, Comp cams roller blower grind, MSD BTM, DIY-WB, Yokogawa video display,T-56 tranny, 9" 3.5:1 Traclock, 4x disk brakes, TCP most everything, shelby roll bar. First fire up 2/14/2004. |
09-10-2005, 10:43 PM | #2 |
Member
Join Date: Mar 2005
Location: Sacramento California
Posts: 449
|
Re: First CALCON bug after two years
I had this happen once. I just had to rebuild the dataloging payload and download to the EEC.
Hopefully that will work for you.
__________________
EEC Analyzer A9M, TwEECer, 306ci, 73mm C&L w Tuner Tube, Cobra Intake, 42# inj, Edelbrock 6037, E303 cam, 155 fuel pump, FPR, 70mm TB, E-Fan, 3.55 gears, Powerdyne 9psi actual 5psi...way more. |
09-12-2005, 11:57 PM | #3 |
Senior Member
Join Date: May 2005
Posts: 290
|
Re: First CALCON bug after two years
Same here. Restarted the computer and made a new payload and it worked fine again.
|
09-13-2005, 08:30 PM | #4 |
Member
Join Date: Aug 2005
Posts: 53
|
Re: First CALCON bug after two years
Thanks and I tried rebuilding the payload. Seems this problem is only effecting postion 1. I wonder if postion 1 is really pos 5? I remember counter clockwise to increase postion number?
__________________
TT331FB - T3/.6/.63 turbos, Spearco intercooler, 302/331 Mexican Block,AFR 185 heads, 80mm MAF, 75mm TB, 50# injectors, Tweecer, Track Heat intake, Comp cams roller blower grind, MSD BTM, DIY-WB, Yokogawa video display,T-56 tranny, 9" 3.5:1 Traclock, 4x disk brakes, TCP most everything, shelby roll bar. First fire up 2/14/2004. |
09-15-2005, 09:40 AM | #5 | |
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
Re: First CALCON bug after two years
Quote:
1st position couter-clockwise is position #1 (one with the dot) Last position clockwise is #5 |
|
|
|