09-26-2005, 12:26 PM | #1 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
commanded a/f....
Curious to what the forced induction guys are setting theirs at the respective load value.
|
09-26-2005, 12:59 PM | #2 |
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
Re: commanded a/f....
around 11.5 to 1 afr at high load/rpm (high boost)....around 13-14 afr at lower loads/rpm (low boost).......
|
09-26-2005, 01:37 PM | #3 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: commanded a/f....
I believe that is what mine is set at around 79% load. Just wanted to compare
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
09-26-2005, 02:40 PM | #4 |
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
Re: commanded a/f....
Lee,
I did mine this way just to be safe and until I can get the motor broke in.... I do not think I will change it to much though as the engine seems to like it "A LOT"...... |
09-26-2005, 02:42 PM | #5 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: commanded a/f....
that's cool. I was just curious at what load values should I start richening the commanded a/f
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
09-26-2005, 02:50 PM | #6 |
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
Re: commanded a/f....
Since your car will be more rpm based than what mine is I would datalog the rpm, load & boost and graph it to see how much boost you are running at certain load/rpms ...You will probably need to start about 50-60% load would be my best guess without actually looking at the car....
Mine is more load based so I have to start at about 2000 rpm and about 20-30% load...... Turbo's are just so cool............
__________________
'14 Dodge Challenger SRT8 392 6-speed |
|
|