|
11-16-2005, 07:20 AM
|
#1 |
|
Senior Member
Join Date: Apr 2005
Location: Ohatchee, AL
Posts: 713
|
pro topline heads
Are these heads any good?
Flowbench Test Data @ 28" of water 200cc Intake Runner .100 .200 .300 .400 .500 .600 .700 Intake 67.61 142.83 212.23 258.80 276.71 283.42 286.11 Exhaust 60 121 159 184 193 199 202 Also i have 1.7 rockers and will be running a e-cam will there be any problems with lift on a stock lower end? If so could i get by with 1.6 rockers?
__________________
 1994 Cobra Pace Car #365 of 1000 light mods 1994 mustang GT 3.55's, 331 stroker, 75mm tb, 75mm maf, mac h pipe SOLD (ole yella u will be missed  ((>>.Rubbing Is Racing 
|
|
|
|
11-16-2005, 07:41 AM
|
#2 |
|
Super Moderator
Join Date: Dec 2004
Location: on the water
Posts: 1,280
|
Re: pro topline heads
Those are some nice heads, my friend has some on his turbo'd 347 and it runs strong.
As for clearance issues, that all depends on the valve size if it has big valves then you may run into clearance issues. I would check that before anything.
__________________
2012 Jeep Wrangler Unlimited--- too many mods to list, about to be sitting on 1 ton axles. 2000 Ford F-350 Dually Lariat LE Crew Cab Short Box 7.3 auto 168,000 miles |
|
|
|
|
11-16-2005, 08:20 AM
|
#3 |
|
Senior Member
Join Date: Apr 2005
Location: Ohatchee, AL
Posts: 713
|
Re: pro topline heads
yeah they have the 2.02/1.60 valves which i talked to the guy that has the heads and he said that with stock cam and 1.7 rocker he had no problems with clearance so i may just go that way for now since i'll be rebuilding the lower end in the future with forged for a turbo at a later date.
__________________
1994 Cobra Pace Car #365 of 1000 light mods 1994 mustang GT 3.55's, 331 stroker, 75mm tb, 75mm maf, mac h pipe SOLD (ole yella u will be missed ((>>.Rubbing Is Racing
|
|
|
|
|
11-16-2005, 09:55 AM
|
#4 |
|
The Kocky One
Join Date: Dec 2004
Location: Yeah, but those cutters won't bust any walnuts.â„¢
Posts: 1,948
|
Re: pro topline heads
I recall a HUGE thread on the corral dealing with those heads, and the custom work required to make them work...
That's about all I recall, though... 
__________________
For Sale: Reproduction Window Stickers, 87+ Mustangs, Cobras, Lightnings, and HD F150! Richard White 93 Cobra Kocky will be back! 
|
|
|
|
|
11-16-2005, 11:04 AM
|
#5 |
|
Senior Member
Join Date: Apr 2005
Location: Ohatchee, AL
Posts: 713
|
Re: pro topline heads
what kinda custom work? i'll check for it on the corral
__________________
1994 Cobra Pace Car #365 of 1000 light mods 1994 mustang GT 3.55's, 331 stroker, 75mm tb, 75mm maf, mac h pipe SOLD (ole yella u will be missed ((>>.Rubbing Is Racing
|
|
|
|
|
11-16-2005, 11:20 AM
|
#6 |
|
The Kocky One
Join Date: Dec 2004
Location: Yeah, but those cutters won't bust any walnuts.â„¢
Posts: 1,948
|
Re: pro topline heads
 to myself. Here was the thread I thought was Pro topline:http://www.corral.net/forums/showthr...hlight=topline And here is the corral search I did: http://www.corral.net/forums/search....archid=1315755
__________________
For Sale: Reproduction Window Stickers, 87+ Mustangs, Cobras, Lightnings, and HD F150! Richard White 93 Cobra Kocky will be back!
|
|
|
|
 |
|
|
Linear Mode
